Flow Analysis
TA Instruments HA Aluminum, 20 mm, 4 Degree Cone, Upper Cone for Use with Lower Peltier Plate, Smart Swap 2 Geometry, HR x0 Instruments Only
Waters TA Instruments HR X0, HA Aluminum, 20 mm, 4 Degree Cone is an upper cone for use with the lower Peltier plate. It has Smart Swap 2 geometry and is for use with HR X0 instruments only.
Brookfield Engineer Labs B Mineral Oil Fluids, B2000
Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument. All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration.
Anton Paar Most powerful rheometer for special applicationsMax torque (300 mNm) and normal force (70 N) specificationsEnables long-term measurements at high torque
MCR 503 Power SpecificationsBearing design: Air, fine-pored carbonMotor design: Electronically commutated (EC) permanent magnet synchronous motorDisplacement transducer: High-resolution optical encoderNormal force measurement design: 360° capacitive sensor, non-contacting, fully integrated in bearingWorking Modules: CMTMin. torque (rotation): 100 nNmMin. torque (oscillation): 50 nNmMax. torque: 300 mNmTorque resolution: 0.2 nNmAngular deflection resolution: < 1 nradMin. angular velocity: 0 rad/sMax. angular velocity / max. speed: 200 rad/s (2,100 rpm)Min. frequency: 2 x 10-8 HzMax. frequency: 200 HzNormal force range: 0.001 N to 70 NNormal force resolution: 0.1 mNTruStrain: YesReady for DMA in tension, bending, and compression: Yes
TA Instruments Stainless Steel, Composite HB, 25 mm, NST, Upper Plate with Composite Heat Break, for Use with Lower Peltier Plate, Smart Swap 2 Geometry, HR x0 Instruments Only
Waters TA Instruments HR X0, Stainless Steel, Composite HB, 25 mm, NST is an upper plate with composite heat break for use with the lower Peltier plate. It has Smart Swap 2 geometry and is for use with HR X0 instruments only.
TA Instruments HR X0 and DHR Rheometer Filter/Regulator
Waters TA Instruments HR X0, DHR and AR Rheometer Filter/Regulator provides clean and regulated air supply for rheometer systems.
TA Instruments Discovery Core Rheometer (DCR), Rotational, Oscillation, and Transient Rheological Measurements, Precision Air Bearings, Low-Inertia Drag Cup Motor, High-Resolution Optical Encoder, Smart Swap, Touchscreen RheoGuide, TRIOS Software
Waters TA Instruments Discovery Core Rheometer (DCR) is a streamlined platform for rotational, oscillation, and transient rheological characterization of viscous materials. Precision air bearings, low-inertia drag cup motor, and high-resolution optical encoder enable accurate measurement under real-world conditions. Standard configuration includes 40 mm stainless steel upper parallel plate and lower Quick-Change Plate with integrated Peltier control (-10 °C to 200 °C) and air cooling, eliminating external circulators. Smart Swap geometry reader automatically identifies attached geometries; lower Quick-Change Plates allow rapid exchange, including textured plates. Optional Concentric Cylinder jacket (PN: 536490.901) enables cup-and-rotor testing for low-viscosity fluids with 0 °C to 150 °C control. Operated via touchscreen with RheoGuide, providing guided methods, workflow customization, and TRIOS-powered data acquisition, analysis, management, and reporting.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Variable-Area Flowmeter with Valve, Acrylic Housing and Brass Fittings, 100 mm Scale, 20 LPM Air
Machined from solid acrylic blocks, these meters have integral metering tubes that provide precise readings even in aggressive plant environments. The meters¿ inlet/outlet ports and mounting studs are extended for easy panel installation. An alternate option is a tripod base (sold separately) which allows for mobility from bench to bench.
Anton Paar Measuring spindle V74 - Low volume vane spindle for ViscoQC 100 & ViscoQC 300
Stainless steel vane spindle equipped with Toolmaster and magnetic coupling. Intended for measuring gel like or shear sensitive substances. Full immersion only for very low sample volume in 25 ml beaker. Recommended 20 ml sample volume.Suitable for use with Anton Paar rotational viscometers ViscoQC 100 – L item NC1818559, ViscoQC 100 – R item NC1818567, ViscoQC 100 – H item NC1818569, ViscoQC 300 – L item NC1818572, ViscoQC 300 – R item NC1818576, ViscoQC 300 – H item NC1818578.